POPMAS Horizontal Adjustable Mount for Google Nest Doorbell (Wired) Left 60 to Right 60 Degree Angle Adapter Bracket

Used this to install an ADC-VDB770 doorbell camera from Alarm.com. The threaded holes in the doorbell mount-plate align perfectly with the ADC-VDB770 mounting holes. I did, however, need to purchase some metric, M4-.70 machine screws, as the screws that come with the bracket, meant for the Nest Hello, are not long enough. Be aware that the threads of the holes are metric and not U.S. Otherwise, I had an old, broken bamboo cutting board that I cut down to close to standard electrical wall-plate size to cover the old screw and wire holes in my brick wall. I then mounted this bracket to that piece of cutting board instead of directly to the wall. Works perfectly for me, and looks great too!Update: After a few days, we decided to replace the smaller, cut-down piece of broken cutting board with the larger piece. I did not cut this larger piece, but just sanded and sealed it. Too, we wanted to place a sign next to the ADC-VDB770. Pictures are of the completed installation.

One of the things my mother wanted when moving to her new home was a video doorbell, and I was happy to help install it for her. The one catch was that the doorbell by the front door was on a wall perpendicular to the front door, so the standard installation equipment was not going to provide an angle sufficient to make the video very effective.This adjustable mount works PERFECTLY for this type of installation. It attaches to the wall just as easily as the standard included equipment and provides a very clean and efficient mount for this video doorbell. The attached pictures illustrate how well the doorbell looks from the outside and how well the camera sees the entire entry space. HIGHLY RECOMMEND!

My doorbell is 90 degrees from my door, i.e. it is on the wall next to the door and not on the same wall as the door.Bought a SimpliSafe doorbell camera with my system and had to accommodate this angle. This little bracket gives me ability to replace the doorbell as instructed but turn the camera 45-60 degrees to face the entrance.Works great.The mount is a little protruding but that’s not the mount’s fault - I have a stucco exterior and can’t exactly blend it in. I’m very happy with the out come and the doorbell/camera works perfect with the flexible mount.I did have to drill one hole to accommodate the slightly different attachment points in the back. This mount is made for NEST camera which is similar but not exactly the same. One small drop hole and it worked great though.

It does the job well and holds tightly. However, for a front door, it leaves too much hardware exposed behind the doorbell. It needs to try to make some kind of cover.

First of all, many thanks to the first review that suggested adapting two of these to accommodate tight fits. Genius idea!We have an extremely tight space and I'd looked everywhere for something that would allow for a sturdy mount while also looking clean and professional. Two of these and some tinkering is the best solution I was able to find.Connect the two skinny plates. The gasket will still fit. If you put the connection at the bottom then the bell will feel rock solid when people push it, but there will be a bit of the plate visible above the device. If you flip it then the plate won't be visible, but there will be a tiny give when someone pushes the button. Personal choice - I went with a cleaner look after trying out both ways.As you can see, these plates will provide about an inch of separation from the wall when using both front pieces.The skinny plates aren't made for mounting screws so you'll need to expand them a little. I used a 9/64 drill bit and wiggled it around a bit to enlarge. Worked perfectly for the mounting screws that come with the nest (they seemed a bit better than the ones that came with the bracket).Nothing else to it. Mounted great, very happy with how solid it feels and how clean it looks.

POPMAS Nest Hello Adjustable Angle Mount from Ideals. Out of the box this is a sub-par item because the portion that attaches to the wall does not match the normal 2 hole design of American generic doorbells. However, the portion that attaches to Nest Hello is setup for generic American doorbells. After receiving 1, I decided to order a second one and switch the 4 hole plate with the 2 hole plate. I did not have to drill extra holes or fill old holes, making it a 5 star setup for me, but I did have to buy the item twice to get the correct plates :(

This door bell camera hold works great and looks good too

Frankly, I was expecting a cheap flimsy gimmick, especially at this cost, (formed plastic is much cheaper to make at the same price point but with more limitation).And when I open the package and looked t the cheap little box that it came in there was an indicator of my suspicionBut I was very pleasantly surprised to find high-quality, well thought through components! Really sturdy and dynamic.Three stars on ease of install, because My install was behind some three-quarter inch molding, and hardy board, and 2 inches from the corner. So very difficult to get to. But after thinking it through and a little bit of cussing, Gotter dialed in. The nut drove me nuts!But again, in the world of cheap garbage we live in, it’s nice to know somebody cares about crafting a well engineered little piece of Solution!