amFilm[3+3 Pack 3D Curved Tempered Glass for S23 Ultra Screen Protector Samsung Galaxy 6.8 Inch with Liquid Dispersion Tech, Designed for Fingerprint Reader, Upgraded Easier Application Tray.

Application was easy. Fingerprint scanner works perfectly after re-registering them. I was nervous reading other reviews about the application being difficult but I think that's just a skill issue. I had no issues with the application. I did ignore the directions when it said not to touch it after placing the screen down as I accidentally made a bubble in the middle by lifting it off when trying to align it before lowering it on the screen. I just squeezed the bubble out the wide with my nail. After the initial 15 second cure I used the microfiber to wipe off the little bits that spilled out on the sides. Any resin left over after the full 60 second cure easily popped off. Not sure of the durability yet but it feels good.

Updated 6/15/24 - well... It lasted less than a month before the delamination began a few days ago, and it popped off just now. Bummer, because it worked great when it was on, and glad was smooth, but it can't fulfill it's basic function if it's not adhering to the screen... Thankfully failed early enough to still be within the return window. Not sure what I'm going to use now. Open to suggestions, this was my last hope for an S23 screen protector.Original review 5/19/24:I have spent an ungodly amount of money on screen protectors for my Galaxy S23 Ultra. Seems like such a waste. This is my 6th try at finding one that worked. The only one that came close was another AmFilm tempered glass one that was actually for an S24 Ultra without the curved edge that I accidently ordered and installed by mistake. Anyway, this is a TEDIOUS installation. Most important to read, re-read, and read again the instructions. I found it CRITICAL to find a level surface for the installation. If you can't work a bubble level, find someone who can. Chances are your countertops, dining room table, etc are NOT actually level, and that WILL jack with the adhesive flow which requires capillary action to complete, and it ain't gonna flow up hill too well... After all the curing was done, it read fingerprints just as well as with no protector on! FINALLY!!! Haven't had it on long enough to assess durability, but so far, so good. No bubbles, no dust, no delamination, installation of case didn't budget the cover at all. Took about 30 minutes to install making sure I understood the instructions, and the intent behind the Engrish of them. There is one spot where it tells you to "follow the arrow" for dispensing the adhesive. I couldn't for the life of me find an arrow on the instructions or on the linked video, so just made a big blob, and it worked out okay. Other than that, pretty straightforward.

Have tried others.Until I can find one I only need to apply once, these are the best out there

I bought this to hide minor scratches on the screen of my phone. I knew that I wanted a liquid UV resin kit since it would fill those scratches and make it look like new again, and have some added protection from a glass protector. Having an installation guide and tools was also a must.Overall, I was having some issues with installation initially from getting bubbles straight away that made it almost impossible to get out from between the protective glass and the phone screen. This kit states that it is bubble free, but not the case for me. I followed the instructions exactly and even leveled my phone as this was a critical part for proper installation. There were bubbles that formed immediately when placing the glass using the guide and tools. I tried migrating the bubbles by squeegee'ing them out using the provided cloth but it kept sliding and adding bubbles back in from the edges.NOTE: the vials of UV liquid will introduce bubbles from the get go, so you have to make sure they are all gone (popped). I did manage to eliminate those bubbles, so not sure where the new ones came from.I has to go through the entire process three times, getting new bubbles each time immediately when the glass just touched the liquid pool formed in a large circle when applied per the instructions. each time I had to clean up the resin from my phone, which was messy, and some started to cure from the lights in my room. I ended up using all three resin kits in the end. I finally managed to get all bubbles out the third time, but with a lot of coaxing and having to add additional liquid on the edges left over from the other two to replace the liquid that squeezed out and air was trying to creep in on the edges. They provide more UV liquid than required in each resin vial, that you will have to absorb the excess after the liquid spreads across the screen under normal installations.After I was FINALLY successful, I was happy with the results and the rest was easy. I like the UV light kit and liked that it used a C type USB for power. I just used one of my phone chargers. Once cured, it looked great.

This is the 1st time trying this product after using the Whitestone product and sorry to say Whitestone is superior.Pro's for this product:1. Installation frame is well thought out with built in pads for excess glue.2. It has pre installed plastic release for when you're ready to drop the protector in place.3. Built in level bubbles to install frame.4. Nice large LED light for curing process.5. Works well with fingerprint.Con's:1. Glass cover can get slightly offset so that front camera lens isn't centered.2. Had a bubble right in the middle that had to be gently tapped out.3. Dried glue at bottom below screen cover(doesn't really matter if you have a phone case though. I have otter box).4. IS NOT compatible with polarized sunglasses! This is the worst one I think because when I'm driving with GPS going, It's difficult to see screen because 2 thick bright lines are going down the screen.UPDATE: The company reached out immediately concerning my problems. They were fast to respond and attentive. Ultimately they issued me a full money refund. Their customer service is top notch!