Drill America - DWTH112-14NPT 1/4" NPT 1-1/2" OD High Speed Steel Round Adjustable Pipe Die, DWT Series

I bought a new faucet for my wife's kitchen sink and the threads were messed up (probably banged up during production, brass is kind of soft) on it right out of the box. Rather than return the item and wait for a new one, I got this die, chased the thread to the correct size and installed it with no problem. Took two days. Excellent quality, worked as advertised. Would recommend.

worked however its more brittle than my other dies and some of the trailing edge teeth have chipped off on 1 st use

Outstanding quality. Due to space limitations I had to grind 6 flats on the OD and use a socket. i was amazed how much force I could apply without damaging the pipe die.

The die was sharp, adjustable, and worked great.

I just used this today and found out that the adjusting screw threads are stripped out. it is past the return date and there is no way to contact the seller. I have to eat the $19. If you do buy this China junk, make sure you check that the screw does in fact work before your return window closes.

If you want the best tap available, then this is it! Highly recommend it for your toughest work and will last you forever!

I used this to thread 3/4/" galvanized pipe for use with a wood clamp. I found it difficult to use and get threads deep enough to thread on the clamp.

Die cuts well but is way oversized. The adjustment screw which allows adjustment to a slightly larger tolerance is actually unnecessary in this case, I couldn't even compress it enough in the die stock to get even an H3 fit. My plug gage rattles around on it it is so oversized and my ring gage won't even thread onto a threading performed with this die. Waste of money, you'd be better served buying a similar priced item from an actual machine tooling supplier for about the same money.