🌬️ Stay Cool, Stay Smart!
The AC Infinity Controller 2 is an intelligent fan thermostat designed to optimize cooling for your AV cabinet. With its advanced features like automated programming, a digital LCD display, and compatibility with multiple fan types, it ensures efficient temperature management while providing a complete installation kit for easy setup.
Display Type | LCD |
Voltage | 5 Volts |
Item Weight | 0.4 Pounds |
Item Dimensions L x W x H | 5.2"L x 1.1"W x 3.1"H |
Material Type | Plastic |
Color | Black |
A**W
Definitely recommend
I'm using this in a makeshift server cabinet with an NVR, NAS, Pi etc as I had to put a plastic cover on the face for babyproofing. It got hot in there. With two AC Infinity 120mm S7's as pushers and two 80mm as pullers, and this controller "supercharging" them, they keep the temp in the cabinet 2-3°f above ambient. The smart mode works great to make sure it doesn't get too cool in there as that could also be bad for the drives. I think the controller could be a bit smaller honestly, but it does look nice and it's functional. It's really nice that it comes with a choice of hardware (self tapping and bolts) plus a template to cut your hole. The probe is very accurate as well and is plenty long.
S**N
Keeping things Cool & Quiet!
Well, let me begin by saying that I typically try buy things from companies that I have had good experience with in the past. This is another example that where I’ve acquired this AC Infinity controller to install in my A/V media component cabinet to improve ventilation. I recently installed a few expensive A/V components and a media sever (NAS) in my cabinet. With the new arrangement, I noticed my NAS was reporting temps in mid-50 degrees Celsius, which was warmer than I had hoped. I then decided to install AC Infinity Fan controller and fans in the cabinet hoping the results would yield improved air flow. It looks very professional and worked very well. but not as much as I would like.I purchased the fan controller and 4 dual intake/exhaust fans. Positioned the two dual exhaust fans near the bottom on each side of the A/V media cabinet and two dual intake fans near the top on each side of the cabinet. I installed the controller on the top of the cabinet on the right side.This setup worked perfectly. Have a look at the pictures for the installation as well as at the temperature monitoring results of the NAS, which runs throughout the day and night.I am very please with the look and the performance.
S**T
really “cool” cabinet fan system
This is a really “cool” cabinet fan system. We have a custom built-in entertainment cabinet in our family room. The top section has the flat screen LCD TV with the Wii equipment and the middle section has an audio system, TiVo, CD player and a VCR, (I know why a VCR). The new TiVo and the 25-year old audio system generate a fair amount of combined heat that I wanted to remove. I did a search on Amazon for cooling fans and looked at several options. Having a system that was temperature controlled and could adjust the speed of the fans was very attractive so I decided to focus on that solution and was very impressed with the features of the AC Infinity products. I ordered the AC Infinity AI-ATC, Fan Thermostat and Speed Controller, MULTIFAN S7, Quiet Dual 120mm USB Fan, and MULTIFAN S5, Quiet Dual 80mm USB Fan. Everything arrived in two days; the three items were well packed and arrived safely.Now I could actually see and test what I got and found they were even better than I had expected. The controller is a perfect size and flush mounts in my equipment cabinet. The temperature probe has a long enough wire to run it down and over to place on the audio amp and under the TiVo where the maximum heat is generated. The fans have large rubber grommets on each corner to stand on or mount with and no vibration is transmitted through. One set of fans are in the equipment section behind the equipment blowing air out through the equipment towards the open room. The second set is located in the TV section also blowing from inside through the TV towards the room. Running at full speed in a quiet room you can of course hear the mechanical fan and wind noise. However, when the audio is on, even at a comfortably low, watch the news level, the fan sound level drops below the audio program level and is no longer discernable. With the controller running in the “smart” mode the fan speed is reduced when the equipment temperature is within two-degrees (or four) of the desired set temperature. As they say on TV “Just set it and forget it”, the controller keeps the fans running as long as the equipment is generating heat above the set point. When the audio amp is turned off and the TiVo goes into stand-by the fans cool them down and then shut off. When I am able to locate my hole cutting drill I will add some ventilating holes in the top of the cabinet and between the sections in order to improve the circulation of fresh cooler air into the cabinet to improve the efficiency.I am so pleased with this cooling solution that I am ordering another setup for our weekend summer cottage up north at the lake. Again, there is an audio system but in addition there is a Magic Jack phone module and the cable modem / WiFi router generating heat. They are in a confined space that gets hot so I had placed a small fan in there to circulate the air. When we are there, I plug in the Magic Jack and turn on the fan. Now I will be able to automate the cooling.If you are looking for a great way to cool down your expensive equipment this is an inexpensive solution that I highly recommend.
M**H
Product has performed great
It does well to control the 6 fans I have running to cool my Xbox series x inside a small cabinet. I have 4 fans pushing air in the bottom of the cabinet and 2 fans running at the top. This keeps that cabinet under positive pressure and allows me to filter the intake so little to no dust enters the cabinet with my xbox.I also run the modem for my internet in this cabinet and the exhaust cools my router.I have smart settings adjusted so the fans kick on at 95 degrees F, and they run full blast at 105. This means the fans aren't on unless I have my Xbox running, and they don't ramp up until I am running a game that pushes the Xbox. For instance the fans never leave their lowest setting while I play my old school favorites, such as the original FFVII, and they begin pushing full capacity for new gen games.The temperature probe seems to be doing a great job hovering over the xbox's exhaust, and sends the right signals to allow my xbox to run full tilt, where I witness far less thermal throttling when pushing the xbox at peak settings.Placing the xbox in the cabinet with 4 fans below and 2 above has proven to be a significant upgrade to the xbox as it performs better than ever, and this controller is the heart of the whole system.Everything was simple to understand and this is a plug and play unit.As a bonus, the digital read out on top of my cabinet, serves to demonstrate I take my electronics, their functionality, and longevity seriously.I couldn't be happier with a basic order and a simple install that's made my xbox not only cool better, but allowed me to condition the air at the same time.
Trustpilot
1 week ago
1 month ago