10x13FT Large Metal Chicken Coop Run with Feeder and Waterer Set, Walk-in Poultry Cage Chicken Runs House for Yard with Waterproof Cover,Chicken Pens for Outdoor Farm

Good product. Sturdy and easy to assemble.

Sturdy and seems safe. Nice and big, great for the price.However- it was a huge PIA to set up!! I think for the price point, they should send precut pieces of the chicken-wire, because you end up with a lot of sharp edges no matter how well you do it. Ill probably use hot glue to cap off the edges I couldn't cut down to keep myself from getting caught/cut on it.I also did receive one incorrect piece. The kit was meant to come with a certain amount of #10  pieces, I was missing a 10 and got an extra 14 which was problematic because even though they are virtually the same and are* the same length, the #14 bar does NOT have a hole for assembling the support bars in the bottom corners, so one of my corners can not take the support bar.This is meant to serve as a temp until we build our own next spring & I feel confident its safe enough to get the job done and make my hens happy.My neighbors have the same one and also like it. Worth it if you're in a pinch for a safe run

The only thing I loved about this product was how easy and clear the instructions were… with that said, I’m so disappointed regarding how flimsy the structure is, the chicken wire is so thin it can literally be cute using household scissors, and talk about zip- ties…. Be ready to attach about 250 of them damned things. Very tacky!

The media could not be loaded.  It took my sister and her kids almost 2 hours to get this whole thing put together ... 6 people who more or less knew what they were doing.Sharp pieces! My sister lost a tiny chunk off one finger. It will heal, but hurts like crazy.Arrived in a LONG box that was quite heavy.Walking along the ridgepole .. it is nice. But I underestimated the slope. It's super short on the sides.We needed a catio for our 3 cats. This is my solution.Cats easily climb the wire. But they could not get through the opening of the door.The flip for holding the door closed is horrible and flimsy.Needed a lot more zip ties.All pieces are there.Tarp is wimpy. I really expected much better and almost lost a star here.My sister took a time lapse video of the work .. We worked an hour ... then waited for the rain to stop before putting the wire on, which took them another almost hour. They are used to putting things like this together and called it, "slightly challenging"I'm so glad we had experienced people to help.

Buyer beware!!Based on the reviews I decided to purchase this product because assembly was not reported to be difficult aside from putting on the wire which I was prepared for. We have two extremely handy people in our home, so the issues were not user error, please read on before buying….When we received the product only one piece had a cosmetic dent (the center of the door bar was slightly pressed in), and all pieces were present so we were optimistic and ready to knock out the project in an afternoon…It took us 3 days working off and on taking breaks because of the frustrations we encountered:1) The holes drilled into the corner pieces for the bars to snap into had large burs on the interior of the slot preventing 90% of the bars from sliding halfway into place without A LOT of intense filing and silicon lubricant.2) About half of the poles had too large of a flare on the tip where they needed to slot into the corner brackets so we had to use a hammer and/or pliers to smooth out the flare to allow them to barely fit.3)The back top corner bracket was molded incorrectly with a large bubble of metal on the interior of the slot that was impossible for us to file down. Ultimately we ended up having to hammer a dent into the pole so it could slide past the defect.4) When we got to the door installation we discovered that two pieces were about 1/2” misaligned from the drilled holes in the base of the poles. We triple checked the fit and the bar installation to make sure we did not install the bars backwards (there are holes for the corner supports on one end and then holes for the door installation on the other). The bars were installed correctly; the holes were drilled incorrectly and required use to correct them.5) The bolts included in the kit for the door were BARELY long enough to fit, and with the misaligned holes it made installation even more frustrating until we realized the holes needed to be re-drilled.With all of the filing and the drilling for the door holes I’m concerned about how much we’ve compromised the galvanized coating and how much longevity we’ll get out of this product. I will update the review as the product ages if there are other issues.

I like the product but it is missing a part. Item number 17 has 8 parts and I only received 7. I have everything ready to put together but now waiting to see if I have to return the whole thing or do I start putting it together then have to take it down if they do not respond. I wish they had a number to call instead of an email address. I am hoping to hear back in a few days if not I will have to return it and order it again. It looks like it is going to be sturdy.

This was pretty easy to put together. I did it by myself one morning. Mainly bought this for the frame as I wanted to upgrade to hardware cloth and more of a structured roof. The large feeder and water were a surprise, they are huge. Pic of my work in progress attached.