🚙 Elevate your Jeep’s storage game with rugged style and unmatched utility!
The DV8 Offroad Front Door Pocket MOLLE Panels are precision-engineered steel replacements for the weak OEM nets in 2018-2025 Jeep Wrangler JL and 2020-2025 Gladiator JT models. Featuring a durable black powder coat finish and a snap-in locking tab design, these panels provide sag-free, expanded storage space with MOLLE compatibility for versatile gear mounting—all installed without removing door panels.
Vehicle Service Type | SUV |
Material | Steel |
Color | Black |
Brand | DV8 Offroad |
Extended Length | 12 Inches |
Fastener Type | Snap |
Mesh Opening Size | 3 Inches |
Product Dimensions | 15"L x 3"W |
Manufacturer | DV8 Offroad |
UPC | 810087813307 |
Model | MPJL-05 |
Item Weight | 6.24 pounds |
Item model number | MPJL-05 |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | MPJL-05 |
L**.
Easy install of a very sturdy product.
Very quality build and an easy install after watching how-to videos. I couldn’t believe I did it as quickly as I did. Night and day difference to the flimsy netting. I can now actually keep my road atlases in the door—-easy access. Plus have a place to put extra beverages. You MUST get these!! I put these on all four doors of myJeep JL. I ordered the DV8 netting replacements for the back of each front bucket seat. Those have not arrived yet.I watched quite a few videos on how to install these. The metal and netting comes out very easy—-almost! Some people actually ripped the netting off the doors and took a little piece of the plastic with them. Some used box cutters to cut the remaining netting off of the door panel instead of pulling the remaining bit which I liked. I pulled the netting and the metal rod as much as I could, which left just a little bit of the netting on each side of the frame. I then used a sharp scissor to cut the fabric netting as I did not want to scratch the door panel plastic. A very easy install after that. You really need to watch some YouTube videos first before you do this, though.
A**R
it works well as a bottle holder and small other things holder
install was easy-i bought this one because it has the water bottle holder area. I initially tried to install with the oem netting in place, because that would be cool, but it wouldn't go in for me and i did not want to risk breaking the door panel etc so I pulled on the netting and cut it as close as i could and then removed it all.It then went inside the door trim somewhat but needed some pushing. I used a rubber mallet to tap it in place. Perfect fit.I have a 2204 willys with the manual seats and manual transmission. you cannot adjust the seats except for the back with the loop with the door closed. No biggie.I have zero issues with my leg resting on the dv8 pocket and i never touch it shifting etc- i have the clutch remember.a normal 16.9 oz water bottle fits perfectly.it's very well built and looks like it will last forever.
T**T
Really nice product, but Molle "usefulness" is questionable
I will start by saying that this is a purchase that I would make again, because I did. One set for the full doors, and one for the half doors after I saw how nice they were. This review does not cover the rear door option, nor the "slim" front door option. For reference, I have a 2021 JL Islander with manually-operated cloth seats.Starting with their packaging. They are REALLY well packed and padded in a thick cardboard box. DV8 Offroad really wants these to arrive in great shape. Kudos.Installation. In the video, they show using power tools. DO NOT use power tools, at least NOT to re-install the door screws. It would be WAY too easy to strip them. When it comes to removing the door netting, I would just be slow and methodical about stretching out the net as much as you can, and using small, sharp scissors, cutting one string at a time. Also, do this with the top piece of the netting. What ends up left in the door will easily go back behind the trim. I left the wire in for 3 out of 4 doors. The one that I did try to remove felt like I was pulling the door apart. If you really want that wire out, take the door skin out and disassemble things the right way.I would recommend using a panel tool to open the gap between the net trim and the door panel, as these can be a little difficult to wrangle into position into the door pockets. It's a tight fit, which is good. This is a rattle-free product!These are not cheaply built. The finish is really nice. It is a matte black, but I did scratch one when I dropped it on the driveway. My bad for not putting down some cardboard or a towel or something while I was installing them. The scratch didn't get down to bare metal, and a quick dab of flat black touch-up paint fixed the scuff. The steel itself is reasonably thick, and probably wont't bend too easily.My impressions on the unit itself? I can't see the Molle panels on the front door units being useful. Anywhere I would put something on the "outside" of them would hit the seats or my leg, as you can see from the pictures. It DOES look nice, and saves weight, I guess. The driver's seat can be slid all the way forward before there's contact between the seat and the bump-out where I put water bottles, so short drivers- rejoice! If you want to make adjustments to the lumbar or seat-back angle, you'll have to do that with the door open. Also, don't leave the seat in the full-forward, rear-seat access position and shut the door. You will bend or break things. As far as it touching my leg? I drive with the seat slid fully back, have a dead-pedal for my left leg, and when I drive, my calf just touches this. I can live with it.BONUS- I don't know if DV8 planned this, but the holes in the bottom for the mounting tabs have just enough room to act a as a drain if you get caught in the rain!Deducted one star because a lot of the marketing pictures showed this with big Molle accessories mounted on the outside. (With the door open, of course!) There's not enough room. Otherwise, a solid 5-star product!
C**E
Great addition to my jeep
Quick shipment, easy to install, fits and looks great! Major upgrade quality product.
P**E
Better than factory netting for sure
Easy install 10 minutes Great product
M**N
Well Built. Good fit. Net cutting not necessary.
Well built. Good fit. Easy to install (10 minutes). No need to cut your nets! (unless you really want to get rid of them). All you need is a torx T-20, flat head (to pry edge - if needed), rubber mallet (final tap in).
S**N
Easy install, works well
These were easy to install and work quite well. Sturdy and much better than the netting. There is not much room between the seat and the door in the Jeep Wrangler, and this makes the most of that space. I wish the front "pocket" area were just a tiny bit larger, but it would probably hit my leg if it were.
A**O
WARNING! DO NOT BUY IF YOU HAVE POWER SEATS - make sure you choose the ones specific to power seats
Don't buy if you have a JL with Power Seats. These will interfere with the operation of the seat controls and potentially cause damage to your seats. There is no mention on the Amazon description, however their website says "Please Note: Not recommended for power seats." which is a bit of an understatement. Nicely made and I knew these were expensive for what they are, but the poor design and lack of product information is very disappointing. I'm glad I found out from the YouTube channel Breacher Up Offroad Customs because if I didn't, I would have done an irreversible modification to my brand new Jeep and installed a faulty product. Apparently works great with Jeeps with manual seats.UPDATE: Manufacture just released a version for power seats titled "DV8 Offroad Electric Seat Front Door Molle Pockets for 2018-2025 Jeep Wrangler JL & Gladiator JT". They are available on Amazon. Just picked up a pair and will see how it goes. But THIS product is not meant for JLs with power seats.FINAL UPDATE: manufacturer released a version for power seats and they work great. Not as much storage and no cup holder but that’s cool with me.
Trustpilot
1 month ago
1 week ago