G1/4 Aluminum Alloy Shell LCD displaydigital Display Flow Thermometer Temperature Indicator CPU Temperature Monitor

The media could not be loaded.  Works as intended, build quality is decent.

As others have stated, the flow meter will not work. I tried reversing flow with zero response. I have secondary meter correctly indicating 0.6Lm.Even increase to 1.25Lm will not trigger this flow meter. If confirmed flow is why you are buying/installing, DO NOT BUY

Bought for my custom loop. Attached at a 45° angle. No leaks, and water doesn't come into contact with aluminum. Display is easily read from my chair about five feet away. Power hookup is Molex. The three-pin connector absolutely works to provide power (despite my assumption that the logic is 5V, and the fan header providing 12V, it works fine. The 4-pin Molex connector is not needed in this case). I assumed it to be a tach report for flow, but my motherboard can't get any reading off of it. It's definitely not a temperature sensor, as those are two-wire hookups, and this is clearly meant for a fan header. Temperature readings seem accurate compared to two other sensors; I don't have anything to check the flow meter against, but it doesn't seem implausible, and does move in the expected direction when I change my pump speed. Good-looking unit.

The media could not be loaded.  Looks good on my new custom cooled rig and does what's it describe. Quality is well made but a bit heavier than I thought so had to put some support so it won't sag the loop. You can reverse the direction of the liquid flow, just check the images they have how to. Had a bit of a leak on the right side where the fitting is connected and seems the thread didn't go all the way through it was already tight and couldn't make it turn any further without possiblity damaging it. A simple solution I did is just wrap teflon tape around the gap and squeeze it in. No more leak after that.

The media could not be loaded.  Finally set up my loop and just outside of my return window. $45 WASTED. I’ve never had problems with water cooling until this. Immediately leaking through the power input!-edit: I took apart, put back together and its no longer leaking. Still works, good thing we use non-conductive fluid. The power cable is super loose (it was loose before I ever added water). The smallest touch turns off the display. It also audibly rattles at flow rates above 3 L/min, but my loop usually only runs at 0.8-1.5L/min wish I had seen the Thermaltake version before I ordered this. Wouldn't recommend.

It is definitely heavy and a great hunk of metal! I cannot wait to put it in my PC!

I hooked up only the 4 pin power connector while I was priming my pump and it fried the wire between the 4 pin and 3 pin! Mayne some how there was an internal connection that jump who the hell knows but now the 4 pin is shot. Can I use just the 3 pin connected to mobo or are they gonna force me to buy another setup. If they would just send me new cabling harness that would be great but who do you contact to even ask.

works great and i can read it from 4 feet away through a tinted glass case.